Pasta dies: materials, design, and informed choices
In recent times, there has been much discussion about the use of the terms "bronze die" and "bronze extrusion", especially in the world of home pasta-making accessories. Some manufacturers question these terms, claiming they are technically imprecise or even misleading.
At Pastidea, we believe it is important to provide accurate and complete information — without oversimplification — and with the utmost respect for those who, every day, choose to make fresh pasta at home, with passion and awareness.
We use the term “bronze die” in our product titles because it has become widely accepted to describe a type of extrusion that produces rough, porous pasta — just like traditional artisanal methods. However, we always accompany this with a clear explanation of the actual material used: a copper-based metal alloy, commonly known as brass, compliant with food contact regulations.
Not all brass alloys are suitable for food use. That’s why we carefully selected ours after a thorough evaluation with our suppliers, ensuring we use a safe, certified material that meets all legal standards.
🔍 What are "bronze dies" really made of?
Home-use pasta dies are not made of pure bronze, but of a technical alloy composed mainly of copper, with the addition of zinc and other elements. This alloy was chosen for its specific qualities:
- excellent workability during manufacturing
- high mechanical stability under pressure
- compliance with EU Regulation 1935/2004 for materials intended to come into contact with food and drinking water
In common language, the term “bronze die” does not refer to the exact composition of the material, but rather to the type of extrusion process that gives the pasta a rough surface, ideal for holding sauces. It’s a term widely used by both professionals and enthusiasts, and has long been associated with a high-quality, traditional method of pasta making.
❌ Why we avoid hybrid dies with non-removable metal inserts
Some competitors offer hybrid pasta dies, made with a food-grade plastic (POM) body and a non-removable metal insert. While this may seem like a reasonable compromise, in practice it has more drawbacks than advantages:
Hard to clean: Since the insert cannot be removed, it’s difficult to thoroughly clean the inside. Pasta residue can build up in hard-to-reach areas, leading to hygiene issues.
Not dishwasher safe: Although the main body is plastic, the fixed metal part means the entire die must be washed by hand — negating one of the main benefits of POM.
More expensive if you want multiple shapes: Each hybrid die includes only one shape. To make different pasta types, the user has to purchase multiple dies, increasing both cost and storage needs.
In short, this is a poorly thought-out solution that combines the disadvantages of metal (not dishwasher safe) and plastic (low thermal conductivity), without offering real benefits to the end user.
In contrast, our solid brass dies, especially when combined with a metal adapter, ensure even heat conductivity across the entire structure, improving extrusion and delivering professional-level results even at home.
If your priority is affordability and flexibility, we recommend our patented modular system with interchangeable inserts and reusable die holders. The inserts can be fully disassembled, are easy to clean, and allow you to purchase only the formats you need — saving you money if you want to experiment with different shapes.
Lastly, for those who want a single, practical format, we offer dies made entirely of POM (food-grade plastic). These are dishwasher safe, easy to use, and deliver faster extrusion with smoother pasta.
In our view, combining two opposite materials in a fixed, non-removable way does not produce a technically sound solution for any specific use case. That’s why we’ve chosen not to produce plastic dies with fixed brass inserts, and instead offer three distinct options — each with a clear and consistent purpose.
⚠️ A word of caution about low-cost molded dies on Amazon
In recent years, low-cost dies have appeared on Amazon, often molded and sold at very attractive prices.
At Pastidea, we feel it’s important to warn consumers: in many cases, these dies are made from materials that are not certified for food contact, and it is impossible to verify their origin or compliance with European safety standards.
Honestly, we would not trust preparing pasta with dies made from questionable raw materials.
Our dies, while slightly more expensive, are:
- milled using CNC machines, not molded — making them far more durable, precise, and long-lasting
- made exclusively with materials sourced from Italian and European suppliers
- delivered with official documentation and MOCA food-contact compliance declarations
This level of care and attention to quality is evident in every die we offer.
✅ Our philosophy: consistent materials, smart design, real choice
At Pastidea, we design every die with a consistent and functional approach — no hybrid shortcuts or gimmicks. We offer three clear alternatives, each suited to different needs:
1. Full POM dies (food-grade plastic)
Ideal for daily use: lightweight, dishwasher safe, fast extrusion, and perfect for smooth pasta.
2. Full brass dies (copper-based food-safe alloy)
The best choice for those seeking a professional finish and rough, sauce-holding texture. Brass offers excellent thermal conductivity, especially when paired with a full-metal adapter.
3. Patented modular system with interchangeable inserts
A compact, hygienic, and cost-effective solution for anyone who wants multiple pasta shapes. Disassemblable and easy to clean, it grows with your creativity.
Conclusion
In a market where shortcuts and vague marketing are common, Pastidea chooses coherence, certified materials, and respect for the people who choose us.
Our dies are made in Italy, with traceable materials, full documentation, and thoughtful design aimed at delivering a safe, durable, and satisfying pasta-making experience, for all levels of users.
Take a look at our range of compatible dies for Philips Pasta Maker 7000 Series and Philips Pasta Maker Avance for example.
